week 2nd

Transmitter and receiver copper wire

For the transmitter and receiver coil, I have prepared two sets of copper wire which wire to receiver part is less than the transmitter part. The main reason why in such a way that design is to enable the receiver coil to get more turns than transmitter part. This is the same concept with the concept of a transformer in which the secondary turn is greater, then the voltage will increase production, also known as step up transformer. The size of copper wire that I buy is 10AWG for transmitter and 26AWG for receiver.

Copper tube

But in my further research, this design has its own problems. due to the tiny size, it must be wound up in large numbers in advance to ensure that the amount of voltage that you want to be better and the desired distance is also.  Therefore, I will try to replace it with a copper tube which is much wider diameter. The size solid copper wire that I got before this was 1.24mm in size. while for copper tube size I get is the 10mm size. With such a large size, the power transfer is much greater than before this.